SY265C LC/SY265C LR Excavator OMM
5-22
Operation and Maintenance Manual — 0420
SANY
9. Shut down the engine.
10. Check the engine coolant level. See “Check the Engine Coolant Level” on page 5-20.
11. Close the engine cover.
Check the Engine Oil Level
1. Prepare the machine for service. See “Maintenance
2. Open the engine compartment door (1). See “Engine
Compartment Door” on page 4-11.
3. Remove the engine oil dipstick (2) from the engine,
wipe it with a clean cloth, then insert the dipstick into
the holder.
4. Remove the dipstick and note the oil level.
NOTE:
The oil level should be within the etched area
(3) of the dipstick.
5. Install the dipstick into the holder.
6. If the oil level is not within the etched area, remove the
engine oil filler cap and add oil until the level is within
the etched area.
Fig. 5-4
1
Fig. 5-5
2
0005314
Fig. 5-6
3
Summary of Contents for SY265C LC
Page 2: ...Page Intentionally Blank ...
Page 287: ...Page Intentionally Blank ...
