SY35U Excavator OMM
Machine Operation
SANY
Operation and Maintenance Manual — 0120
4-39
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
NOTE:
The tracks may slip when the machine is
traveling uphill. Use the arm to help the
machine travel uphill as necessary.
•
To maintain machine balance on an incline, extend the
boom and arm uphill and keep the bucket 8 in. to 12
in.
(20
cm to 30
cm) off the ground (9). Travel at low
speed.
•
When traveling uphill, keep the travel motors (10) at
the rear of the machine.
•
When traveling downhill, keep the bucket in the
traveling direction and 8
in. to 12
in.
(20
cm to 30
cm)
above the ground (11). Lower the bucket immediately
if the machine slips or loses balance.
Engine Stalls on an Incline
If the engine stalls when the machine is on an incline, lower the bucket to the ground immediately, move all control
levers to the neutral position, and restart the engine.
If the engine stalls on an incline, do not use the left joystick to swing the machine. The upper structure will swing
due to its weight.
Before traveling up a steep incline, allow the machine to warm up.
Fig. 4-53
0002905
9
10
Fig. 4-54
0002907
11
