Machine Operation
SY35U Excavator OMM
4-42
Operation and Maintenance Manual — 0120
SANY
Towing the Machine
If the machine is trapped in mud and is unable to get out under its own power, use wire rope(s) (2) attached to the
frame towing point (1) to assist in its removal.
Towing Point for a Light Load
The machine is equipped with a light-load towing point (1) on the frame that can be used to tow a light load.
WARNING!
•
Make sure the equipment used for towing the
machine has the correct capacity rating.
•
Never use a broken chain, worn wire rope, or
a bent hook to tow the machine.
•
Never jerk the wire rope.
Failure to follow these warnings could result in
death or serious injury.
NOTICE!
•
Make sure the equipment used for towing
has the correct capacity rating.
•
A shackle must be used.
•
Keep the wire ropes/slings horizontal and
parallel to the tracks.
•
Drive the machine at low speed.
•
Never use a broken chain, worn wire rope, or
a bent hook to tow the machine.
•
Never jerk the wire rope.
Failure to follow this notice could damage the
machine or cause it to operate improperly.
Fig. 4-56
0002911
1
2
0002913
Fig. 4-57
1
