SY35U Excavator OMM
Machine Controls
SANY
Operation and Maintenance Manual — 0120
3-33
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
MONITOR
The monitor (1) displays machine operating information
and provides access to change system parameters.
Daily Maintenance Information Screen
Fig. 3-50
0003808
1
When the key switch is turned to ON, the monitor displays
the Daily Maintenance Information screen.
The checklist steps 1–7 should be completed before
starting the machine. See “Prestart Checks and
Adjustments” on page
1. Start the engine and idle until operating temperature is
reached. See “Starting the Engine” on page
2. Press the button below the check-mark icon (1) to
confirm all checks and procedures have been
completed. The display will change to the home
screen.
NOTE:
If maintenance is required, the Maintenance
Information screen will display instead of the
Daily Maintenance screen. See “Maintenance
Information Screen” on page
Fig. 3-49
0003777
1
