Machine Controls
SY35U Excavator OMM
3-46
Operation and Maintenance Manual — 0120
SANY
Date and Time Setup Screen
Fig. 3-66
0003818
4
3
1
2
The Date and Time Setup screen is accessed by selecting
the Time Calibration icon on the Function List screen and
allows changes to be made to the date, time, and time zone.
1. Press the button below the up/down icon (1) to increase
the value of the selected position.
2. Press the button below the left/right icon (2) to select
the position for adjustment.
3. Press the button below the check-mark icon (3) to
confirm the time adjustment.
NOTE:
To return to the previous screen, press the
button below the return icon (4).
System Unlocked Screen
For factory and service use only.
Reserved Function
Not used at this time. Reserved for future function.
