Machine Operation
SY35U Excavator OMM
4-4
Operation and Maintenance Manual — 0120
SANY
The work area is where the actual job is performed. Within the work area are hazard areas. Hazard areas
immediately surround the machine where personnel may be at risk due to the machine’s operation and movement.
All personnel within the work area must wear appropriate personal protective equipment (PPE).
The machine operator is responsible for the safety of all personnel within the hazard area.
GENERAL JOB SAFETY
2-11 for additional information.
Operator Responsibilities
The machine operator must perform the following:
•
Reject the job site if there are doubts regarding safety.
•
Become familiar with the work area and surroundings before beginning work.
•
Read and completely understand the instructions in this manual prior to operation.
•
Know and obey all operating procedures, applicable laws, and regulations.
•
Know and follow the requirements for safe operation.
•
Know and use the required safety precautions and protective devices.
•
Know and use the correct hand signals between the machine operator and a signalman.
•
Stop machine operations immediately if any defects endangering safety are found.
•
Maintain complete control of the machine at all times.
•
Before leaving the cab, make sure that all control devices are set to the neutral or low-idle position, and
that the engine is shut down.
•
Give warning signals when necessary.
