SY35U Excavator OMM
Maintenance
SANY
Operation and Maintenance Manual — 0120
5-33
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
Change the Engine Oil and Filter
NOTE:
See “Fluid Capacities” on page
5-11 for the engine oil capacity.
1. Prepare the machine for service. See “Maintenance Safety” on page
2. Remove the four fasteners (1) and oil drain cover (2).
3. Place a suitable container under the engine oil drain
plug (4).
4. Remove the engine oil drain plug and allow the oil to
completely drain.
5. Install and tighten the engine oil drain plug.
6. Install oil drain cover and fasteners.
NOTICE!
Dispose of used oil and filters in according to all applicable environmental regulations. Failure
to do so could damage the environment.
Fig. 5-26
0003858
2
1
1
Fig. 5-27
0003838
4
