SY50U Excavator OMM
Machine Operation
SANY
Operation and Maintenance Manual — 0120
4-51
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
Use level, solid ground and keep the machine a safe distance away from roads during loading and unloading
operations.
•
Make sure the loading ramps have adequate width,
length, thickness, and strength. The maximum angle of
the ramps is 15° (1).
•
Never change direction on the access ramp. If
repositioning the machine is necessary, back up,
re-orient the machine, and drive up or down the ramps.
•
Use care when driving over the joints (2) between the
trailer and the ramps.
•
Never operate any control levers other than the travel
control levers when the machine is on a ramp.
•
Clean the loading platform, ramps, and trailer floor
before loading or unloading.
Loading the Machine
•
Use a loading platform or ramps when loading or
unloading the machine.
Fig. 4-67
0002935
1
Fig. 4-68
0002933
2
Fig. 4-69
0002931
