SY50U Excavator OMM
Maintenance
SANY
Operation and Maintenance Manual — 0120
5-9
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
Daily Inspection and Maintenance
Do the following before operation with the engine off:
•
Perform daily service as necessary.
•
Inspect the machine for loose or missing components.
•
Clean the cab.
•
Check all controls for smooth operation and make sure they return to the neutral position.
•
Make sure all safety decals are in place and are legible.
•
Make sure safety equipment is in place and in operating condition.
•
Check for fluid leaks.
Check the following during operation with the engine running:
•
Monitor the control panel for normal machine operating parameters.
•
Make sure that the machine operates normally.
•
Check for fluid leaks.
Check the following after operation with the engine off and cool:
•
Check service points for wear or damage.
•
Clean the cab.
•
Check for fluid leaks.
•
Check for loose or missing fasteners and components.
