SY50U Excavator OMM
Maintenance
SANY
Operation and Maintenance Manual — 0120
5-23
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
Closing/Locking the Right Front Access Door
1. Lift the access door support arm (1) up slightly from
the support position, close the access door, and insert
the key.
2. Turn the key counterclockwise to lock the door.
Remove the key.
Fuse Access Door
Unlocking/Opening the Fuse Access Door
Fig. 5-12
2
0003065
1
1. Insert the key into the fuse access door lock (2).
NOTE:
Make sure the key is fully seated into the lock
before turning. The key may break if turned
before it is fully inserted.
2. Turn the key clockwise to unlock the fuse access door
(1). Remove the key and lower the door.
Closing/Locking the Fuse Access Door
1. Raise the fuse access door to the closed position and insert the key.
2. Turn the key counterclockwise to lock the door. Remove the key.
Fig. 5-11
0003020
1
