3-26
MACHINE CONTROLS
SY60C Excavator OMM
Dozer Blade Control Lever
0002784
Figure 3-51
The dozer blade control lever (1) is located on the right
side of the operator seat:
• Move the lever forward (3) to lower the dozer blade.
• Move the lever backward (2) to raise the dozer
blade.
NOTE:
The dozer blade control lever will return to the
neutral position when released.
Boom Swing Control Pedal
0003015
Figure 3-52
WARNING
Do not place your foot on the boom swing control
pedal except when using it for boom swing
operation. Move the footrest down to cover it
when not in use to prevent unexpected
movement.
Failure to follow this warning could result in death
or serious injury.
The boom swing control pedal is used to swing the boom
at the boom pivot, independent of the upper structure:
• Lift up the right foot rest (1).
• Press the boom swing control pedal on the left (2) to
swing the boom to the left.
• Press the boom swing control pedal on the right (3)
to swing the boom to the right.
Neutral (N): Release the boom swing control pedal and
the boom is held in the current position.
3
2
1
2
3
1