MACHINE OPERATION
4-15
SY60C Excavator OMM
0002764
Figure 4-24
3.
Move the hydraulic lockout control lever (2) to the
locked (closed) position (3).
0002757
Figure 4-25
4.
Adjust the throttle control dial (1) to MIN (low idle)
and allow the engine to idle for 5 minutes to cool
down.
5.
Turn the key switch to OFF and remove the key.
Inspection after Engine Shutdown
1.
After shutting down the engine, conduct a
walk-around inspection. Check the work equipment,
the exterior of the machine, and the undercarriage.
2.
Check for fluid leaks.
3.
Fill the fuel tank with diesel fuel.
4.
To prevent fires, clear the engine compartment of
combustible debris.
5.
Clean mud from the tracks and undercarriage.
3
2
1
