background image

The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.

SANUPS is a trademark of SANYO DENKI CO., LTD.

Specifications are subject to change without notice.

3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan   TEL: +81 3 5927 1020

https://www.sanyodenki.com/

CATALOG No.P1023B006 '21.6

  Fire Service Law and Fire Prevention Ordinance in Japan

The Fire Prevention Ordinance regulates the total battery capacity of storage batteries, including lithium-ion batteries, that can be installed indoors. When installing UPSs indoors, confi rm that the total battery capacity 
in one location does not exceed 4,800 Ah·cell. In other cases, consult with your local fi re department for approval.
Note that the UPSs cannot be used as an emergency power supply for fi refi ghting equipment.

  Building Standard Law in Japan

The UPSs cannot be used as backup power for building facilities conforming to the disaster management requirements defi ned in the Building Standard Law.

Notes before Purchase

  

Before installing, assembling, and using the products, please read Instruction Manual carefully and 

use them properly.

  

When using the products in the following applications, consult with us in advance because special 

considerations are required for operation, maintenance, and management.

 (a)

  

Medical equipment that may have direct effects on human life or human body.

 (b)

  

Trains, elevators, and other machinery that can cause injury.

 (c)

  

Socially and publicly important computer systems.

 (d)

  

Other equipment that is related to safety of human life and that can have major impact on mainte-
nance of public functions.

  

For use in an environment where vibration is present, such as in a car or a ship, please consult with 
us in advance.

  

Never attempt to disassemble or alter the products in any way.

  

For installation and maintenance work of the products, please consult with us or properly licensed 
personnel.

  

Please contact us concerning the disposal of used storage batteries supplied by SANYO DENKI.

  

The products listed in this catalog fall into the category 16 of Appended Table 1 of the Export Trade 
Control Order. To export the products as an individual part or to export a device into which the prod-
ucts are assembled, the “Inform Requirements” and “Objective Requirements” that the Ministry of 
Economy, Trade and Industry of Japan established based on the “Catch-all Controls” must be studied 
for applicability. Accordingly, appropriate export formalities must be performed.

  

SANYO DENKI will not be liable for any direct or indirect damages or loss, including but not limited 
to equipment downtime, missed power sales revenue, business interruptions, increased power 
purchases, resulting from the use of or inability to use our products or services.

  

The products listed in this catalog are equipped with lithium-ion batteries. When transporting the 
products, do not transport by air. When transporting by sea, transport must be carried out according 
to the International Maritime Dangerous Goods (IMDG) Code. Also, depending on the country and 
region, there are cases where regulations are established independently, so please consult with the 
shipping company in advance.

For any inquiry or consultation, please contact a SANYO DENKI sales representative.

SANYO DENKI's  ECO PRODUCTS are designed with the concept of lessening impact on the environment in the process from product development to waste. 
The product units and packaging materials are designed for reduced environmental impact. We have established our own assessment criteria on the environmental 
impacts applicable to all processes, ranging from design to manufacture. Those products that satisfy the criteria are accredited as ECO PRODUCTS.

■ 

ECO PRODUCTS

UPS main unit

(Inverter)

Battery

Battery warranty period is one year. It can be extended to three years by registering the UPS.

UPS warranty period

Delivery date

1

 year

2

 years

3

 years

Complete registration on our website:

https://www.sanyodenki.com/

Note:  This benefit is limited to users in Japan.

For warranty details, see the Warranty Card included with your UPS.

Summary of Contents for S-A11KL102B0013SSN00

























Reviews: