1.
From the main menu, highlight
Phone Book
, and press
.
2.
Highlight
Speed Dial #s
, and press
.
3.
To select a corresponding speed dial number from 2-9,
highlight an unassigned number and press
.
4.
Highlight the entry from the list.
Press
or
of the Navigation key to change the stored
label per entry name.
5.
Press .
To use speed dial:
1.
From the Standby mode, press and hold the appropriate
key that corresponds to the memory location for
approximately two seconds.
OR
1.
From the Standby mode, press the appropriate key.
2.
Press or .
or
Highlight
Call
or
Call: Speaker On
, and press
.
The display confirms that the number has been dialed
when it shows
Connecting
.
Abbreviated Dialing
Abbreviated Dialing is another form of speed dialing. If the
last four digits you entered do not match any entry’s phone
number in your phone book, the four digits are prepended
with the digits specified by you and a call to the prepended
number is initiated without further input.
To activate this feature:
1.
From the main menu, highlight
Setup
.
2.
Press .
3.
Highlight
Abbrev. Dial
, and press
.
Section 10
Using Your Internal Phone Book
87
10
Internal
Phone Book
Using Different Dialing Methods
Prepend Dialing
Prepend dialing allows you to alter a phone number in your
Phone Book by adding additional numbers. For example, if
your Internal Phone Book entry was entered without an area
code and you are out of town, you can prepend that entry
with the appropriate area code.
1.
Highlight the phone number stored in Phone Book entry
or call history using one of the previously described
methods, and press
.
2.
Highlight
Prepend
, and press
.
3.
Enter the digits you wish to prepend.
4.
Press or .
or
Highlight
Call
or
Call: Speaker On
, and press
.
Using speed dial
With this feature you can dial Internal Phone Book entries
with one key press for locations 2-9. Save your memory
locations 2-9 for speed dialing or your most commonly used
phone numbers. Speed dial numbers must be stored in your
Phone Book to use this feature.
To store a speed dial number:
1.
Press
of the Navigation key.
2.
Select the Internal Phone Book entry for which want to
set a speed dial number and press
.
3.
Highlight the phone number you want to set a speed dial
and press
.
4.
Highlight
Set Speed Dial
, and press
.
5.
To select a corresponding speed dial number from 2-9,
highlight an unassigned number and press
.
OR
Section 10
86
Using Your Internal Phone Book
