7
Many of your TV’s functions are controlled through the menu function.
During menu operation a bar at the bottom of the screen show
which controls can be used.
Press
u
button to enter and exit the 5 sub menus Picture,
Sound, Timer, Setting and Preset.
When a sub menu is selected its options are displayed and its
colour will change to yellow.
When you have set each Sub menu you can either press MENU
to exit and clear the screen or press
5
until the sub menu is
re-selected. Using the
2
or
1
you can rotate again.
Press the MENU button and select Picture menu by pressing the
2
or
1
buttons, set the picture settings for your personal
preference.
Use
5
or
6
to select eg. Brightness and
2
or
1
to
adjust levels.
Tint : is only useful if NTSC equipment is connected.
Text bright : you can set to minimum, centre or maximum.
Use
5
or
6
to select and
2
or
1
to set.
To memorise these settings press the F/OK button. (The OK? will
change to OK.)
To exit press the MENU button.
Press the MENU button and select Sound menu by pressing the
2
or
1
buttons.
Select and adjust to obtain the best sound settings for your environ-
ment using
5
or
6
and
2
or
1
buttons.
To exit press MENU button.
■
Off-timer setting
The Off timer will switch the TV set into the standby mode when
the selected time has elapsed.
1. Press the MENU button and select Timer using
2
or
1
buttons. Select OFF Timer using
5
or
6
buttons. The
complete line turns yellow.
2.
Press
2
or
1
buttons to select --:-- (highlighted yellow).
3.
Press
5
or
6
buttons to change time.
The time changes in 30 minute steps.The maximum time is 2:00hrs.
4.
Press
2
or
1
buttons to highlight complete line (yellow).
5. Press the F/OK button to store your settings.
If you have set the off timer, then one minute before the TV
switches off, a display appears on the screen.
✐
If the TV set is switched off by the standby button on the
remote control or by the standby switch on the top of the TV
set the timer settings will be cancelled.
Press MENU button to exit, or press
2
to highlight complete
line yellow and then Press
6
to set Alarm timer.
■
Alarm timer setting
This function can be set so that an alarm goes off. This only
happens when the TV is switched on. It may remind you to do
something.
1. Press the MENU button and select Timer using
2
or
1
buttons. Select Alarm timer using
5
or
6
buttons. The
complete line turns yellow.
2. Press the
2
or
1
buttons to select --:--.
3. Press
5
or
6
buttons to change time.
The display changes in 5 minute steps and the maximum time
period is 3:00 hours.
4. Press
2
or
1
buttons to highlight complete line (yellow).
5. Press F/OK button to set the Alarm.
When the time period is up, the time up signal will appear on the
screen and the alarm will sound for 15 seconds.
To cancel the Alarm timer press any button and the display will
disappear.
MENU OPERA
MENU OPERA
TION
TION
Picture menu
Sound menu
Auto Tuning
Auto sort Start , Country
Prog. Preset
Swap
Fine Tuning
Brightness
Contrast
Colour
Sharpness
Tint ( only if NTSC equipment is detected)
Text brightness
memory
Picture
MENU
Sound
Timer
Volume
Bass
Treble
Balance
OFF Timer
Alarm Timer
Setting
Child lock
AV1
ON/OFF
Video/S-video
Preset
Auto
Channel
Position
Semi
Channel
Position
Skip
memory
Picture
Memory
Text brightness
Tint
Sharpness
Colour
Contrast
Minimum/Center/Maximum
OK? / OK
42
19
2
27
Brightness
38
OFF timer
Alarm timer
Timer
Sound
Balance
Treble
Bass
Volume
12
0
0
0
eg.
Timer menu
- - : - -
Timer
Alarm timer
OFF timer
- - : - -
OK?
