When the teletext service is not transmitting with the FLOF, 4 coloured
page numbers will appear at the bottom of the screen instead of the top-
ics.
Teletext reception
If your aerial signal is poor, the teletext reception may be poor.
✐
When switching from TV mode at the AUTO, NATURAL, ZOOM, TITLE
IN or FULL screen mode to teletext mode, the teletext screen will
change to FULL screen mode automatically.
■
Updated pages
Some text pages are updated such as latest sports scores or traffic news.
Select a latest page.
1
Press the
button in the teletext mode to view the TV picture.
When the page is updated the page number will appear over the
normal TV picture.
2
Press the TXT/TV button to view the updated page.
✐
If the page has sub pages the number will appear when the sub page
is changed.
15
TELETEXT/OTHERS
Power source
AC 220-240V 50/60Hz
Television system
System B/G
Colour system
PAL/SECAM/NTSC4.43 on air (Automatic
colour system selection)
PAL/SECAM/NTSC4.43/NTSC3.58 in AV
mode
Channel coverage
VHF: 0-11, 5A (Australia)
1-11 (New Zealand)
UHF: 28-69 (Australia)
21-69 (New Zealand)
CATV: S1-S41, X, Y, Z, Z+1, Z+2
Aerial input impedance
75ohm
Rear AV Input Terminal
AV1
CENELEC Standard
Input:Composite video, RGB and audio-L/R
AV2
Phone Jack : Video input and Audio-L/R input.
S-Video Input: Din 4 pin x 1 (Separated Y/C Signals Input)
Front AV Input Terminal
AV3
Phone Jack : Video input and Audio-L/R input.
Rear Monitor Output Terminal
Phone Jack : Video monitor output and Audio-L/R monitor outputs.
Headphone jack: Mini Stereo jack
✕
1
Speaker
5 cm x 12 cm x 2 pcs.
Sound Output (RMS)
5W + 5W
Picture tubes (inches)
28
Dimensions (WxHxD mm)
774 x 491 x 508
Weight
approx. 36.6Kg
Specifications subject to change without notice.
■
Specifications
■
Option setting
This TV set allows you to set up the following special functions.
■
Maximum volume setting and prohibition of pre-setting
Sets the current volume as the maximum volume level and prohibition of
the tuning.
PROHIBITION OFF or PROHIBITION ON
■
Start up programme position
Presets the programme position when the set is switched on.
START POSITION OFF
➞
Last programme position start
START POSITION P1
➞
Programme position "1" start
START POSITION P2
➞
Programme position "2" start
START POSITION P3
➞
Programme position "3" start
START POSITION P4
➞
Programme position "4" start
START POSITION P5
➞
Programme position "5" start
START POSITION P6
➞
Programme position "6" start
START POSITION P7
➞
Programme position "7" start
START POSITION P8
➞
Programme position "8" start
START POSITION AV1
➞
"AV1" start
PROHIBITION ON
START POSITION OFF
■
Sub page access
With a text page selected which has sub pages, you may wish to read a
known sub page number.
1
Press the
button in the teletext mode. “Sub code ----” will be dis-
played on top of the screen.
2
Enter the sub page number using the (0-9) numeric
buttons
. e.g..
0004.
3
Press the
button to return the normal TV picture.
Immediately when the entered sub-coded page is reached the page
number will appear on the TV picture.
4
Press the TXT/TV button to view the sub-coded page.
■
Operation
SETTING PROCEDURE
1
Press and hold the
button on the Remote control handset
and then press the CH
button
on the TV set.
2
Use the
or
button to highlight the desired option item
from the menu, and select the mode by pressing the
+
or -
button.
3
Press the
button to exit from the menu.
Inst. manual_F8WA 12/30/03 11:26 AM Page 15
