background image

Part No. 1AA6P1P4458-- F8WA (FAW-1)

SANYO ELECTRIC Co., Ltd.

■ 

NO PICTURE, NO SOUND

Check if TV is plugged in.

Try a different channel, if OK, probably station trouble.

■ 

POOR PICTURE, SOUND OK

Adjust BRIGHTNESS control.

Adjust FINE TUNING control.

Check aerial connections

■ 

NO COLOUR, PICTURE OK

Adjust COLOUR control.

Adjust FINE TUNING control.

Is the programme in colour ?

■ 

WEAK PICTURE

Check aerial connections on back of set.

Check aerial for broken wires.

Re-orient aerial.

■ 

The following faults are not caused by the receiver:

"GHOSTS"
Reflections of signals from mountains or high buildings will cause multiple
images, called "Ghosts". These abnormal conditions can be reduced to
minimum by repositioning aerial or by installing a new one suited for your
area.

"INTERFERENCE"
Interference may be caused by electrical appliances, car ignition systems,
etc. This should normally be a temporary condition, but should this inter-
ference persist, contact your dealer.

If the power cord or plug is damaged.

If liquid has been spilled into the television receiver.

If television receiver has been exposed to rain or water.

If the television receiver has been dropped or the cabinet has been

damaged.

If the television receiver exhibits a distinct change in performance.

If the television receiver does not operate normally by following the

operating instructions.
Adjust only those controls that are covered in the operating instruc-
tions as improper adjustment of other controls may result in damage.
This will often require extensive work by a qualified technician to
restore the television receiver to normal operation.
When replacement parts are required, have the service technician
verify that the replacements he uses have the same safety charac-
teristics as the original parts. Use of manufacturers specified replace-
ments can prevent fire, shock or other hazards.

Your television is fully transistorised and does not contain any user serviceable components. 

Removal of the cabinet cover may expose you to dangerous voltages. Refer all servicing to qualified service personnel.

Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:

Servicing

Helpful hints

Inst. manual_F8WA  12/30/03  11:26 AM  Page 16

Summary of Contents for CP28WF2

















Reviews: