4
Select from the following by pressing the Programme up or down
button.
Contrast
: To adjust the picture contrast.
Brightness : To adjust the picture brightness.
Colour
: To adjust the picture colour.
Tint
: To adjust the colour phase. (This appears when NTSC
signals input.)
Sharpness : To adjust the picture sharpness.
Text Bright : To adjust the teletext brightness level.
Memory
: To store the preference of the picture level into
“PERSONAL” mode, see next chapter.
3
Press the Level up button.
S-1
STEREO
ON 05:30
OFF 01:30
03
Programme Position No.
Sound System
Sound Status
On-timer Display
Off-timer Display
GENERAL OPERATION
6
■
Picture adjustment
1
Press the MENU button.
2
Select Picture by pressing the Programme up or down button.
●
Storing personal preferences into “PERSONAL” mode
1
Select memory in the Picture menu by pressing the Programme up or
down button.
memory?
Brightness
Contrast
Colour
Sharpness
Text bright
Picture and sound setting
■
Direct channel selection
To select channels directly, please follow the below steps:
1
Press the CS button. The current channel number will be displayed on
the screen.
2
●
If you do not know the channel number, press the
Programme up
or down
to start channel searching. When a station is
found searching stops automatically. If this is not the desired station
repeat until the desired stations is found.
●
If you know the channel number, press the CS button again to
change to “C--” whilst in the CS mode. And then enter the channel
number by using the (0-9) numeric buttons.
If you wish to select hyper channel number, select “H--” by pressing the
CS button. Then enter the hyper channel number.
3
While the screen display is still visible, press the F/OK button to store
your selection into the memory. The colour of the channel number
changes white to yellow momentarily.
C 21
C
- -
■
Programme selection
●
Select a programme position by using the 0 - 9 numeric buttons. Use
-/--
button first to select the 10 to 99 programme positions.
●
Press the
Programme up
or down
button to select the
programme in sequence.
■
Sound volume control
To adjust the sound volume level, press the
Level up
/down
.
Volume
10
■
Programme information and sound system
selection
Press the
Programme information call
button
to display the
programme information such as current programme number, stereo status,
sound system and remains time if set the timer, for about 5 seconds.
Important !
About Sound System: Always select “S-1” of the sound system. When
is pressed, the screen display of sound system is changed, how-
ever, other sound systems (S-2, S-3 and S-4) except S-1 (B/G system) do
not work.
Picture
Sound
Timer
Setting
Preset
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
40
5
Adjust settings by pressing the Level up or down button.
Brightness
Contrast
Colour
Sharpness
Text bright
memory?
40
6
To return to the normal TV mode, press the MENU button repeatedly.
2
Press the Level up button, a tick appears in the box and the settings
are stored.
memory
Brightness
Contrast
Colour
Sharpness
Text bright
3
To return to the normal TV mode, press the MENU button repeatedly.
Inst. manual_F8WA 12/30/03 11:26 AM Page 6
