Sanyo CP29KX2Z, Instruction Manual

Tuning of the Channels

■

The Automatic Tuning operation can be 

cancelled at any time by pressing the 

Programme UP

or 

DOWN

button. 

Normally, set the colour system to “AUTO”, if the
clear picture cannot be obtained, change the
colour system until the optimum image can be
produced.  

5

Press the 

VOLUME (+)

button to start 

channel tuning.                                

4

Select “SEARCH” by pressing the

Programme UP

or

DOWN

button.

SYSTEM
SIF

POSITION

1

AUTO

BG

MODE

AUTO

To select colour system

1)  Select SYSTEM with the 

Programme UP

or

DOWN 

button.

2) Press the 

VOLUME 

(

+

or 

-

) button to 

select a optimum colour system.

SEARCH

SIF

POSITION

START

1

BG

MODE

AUTO

B/G

(5.5MHz)

D/K

(6.5MHz)

I

(6.0MHz)

M

(4.5MHz)

When the sound is not clear or no sound is pro-
duced on a programme number position, change
the sound system.

To select sound system

1)  Select SIF with the 

Programme UP

or

DOWN 

button.

2) Press the 

VOLUME 

(

+

or 

-

) button to 

select an optimum sound system.

SEARCH
POSITION

START

1

MODE

AUTO

SYSTEM

AUTO

AUTO

PAL

NTSC4.43

NTSC

(Refer to 

Broadcast Transmission System List

indicated by page 11 in a setup of sound system.)

(Refer to 

Broadcast Transmission System List

indicated by page 11 in a setup of colour system.)

AUDIO

LANGUAGE
GAME

PICTURE

Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.  

There are three ways of tuning as follows;

1. Automatic Tuning (the basic way): 

All receivable channels are automatically tuned
in and memorized in consecutive programme 
position. 

2. Semi-Auto Tuning: 

Use to preset a receivable channel in any 
desired programme position, e.g. the position 
with the same number as the channel.   

3. Manual Tuning: 

Manually tune a channel if it cannot be auto-
matically tuned, such as when the signal is 
poor.

1

Press the 

MENU

button for MAIN menu 

display.

SEARCH

SYSTEM
SIF

POSITION

START

1

AUTO

BG

2

Select “PRESET” by pressing the 

Programme UP

or

DOWN

button.                 

3

Press the 

or

-

button for 

PRESET menu display. On entering 
PRESET display, Automatic Tuning will be 
selected initially.

After all receivable channels have been found
and stored, the TV set automatically returns to
programme position “1”.

AUDIO

LANGUAGE
GAME

PICTURE

PRESET

SELECT       ENTER

M

EXIT

Automatic Tuning

14

-/--

CH

CH

1

INST. M_29-C4LWG(Aus)  6/22/04  7:59 AM  Page 14