Sanyo DC-DB10, Instruction Manual

F8

7

Time/Date

Ensemble/Multiplex (Group name)

Frequency

Audio Bit Rate 

Signal strength

DLS

Programme Type

DAB display modes

Every  time  you  press  the

  DISPLAY/INFO

  button,  the  display  will  cycle  through  the  following  display 

modes: 

Time and date

The  time  and  date  will  be  automatically  updated  by  the  broadcasted  information;  it  is  no  need  to  set 
the  clock  manually.  In  the  unlikely  event  that  no  clock  information  is  received,  the  display  will  show 
“[No Time]”.

Frequency

The frequency of the present station will be displayed.  

Audio bit rate

The display will show the digital audio bit rate being received.

DLS

DLS  stands  for  Dynamic  Label  Segment  which  is  a  scrolling  message  that  the  broadcaster  may 
include in their transmissions. The message usually includes information such as programme details 
…etc.

Signal strength

The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the 
bar will be from left to right.

Programme type

This describes the style of the programme that is being broadcast. If the information is not available, 
the display will show “[No PTY]”.

Ensemble/Multiplex (Group name)

The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a 
single  frequency.  There  are  national  and  local  multiplexes,  local  ones  contain  stations  that  are 
specific to that area.

Note: 

  Press  and  hold  the 

DISPLAY/INFO

  button  for  longer  than  2  seconds,  the  software  version 

number will be displayed.

FM radio

1.       To select FM, press the 

DAB+/FM

 button, the FM frequency will be displayed. (F. 8)

2.

To activate auto search, press and hold the 

I

◀◀

or 

▶▶

I

buttons until it starts to scan down or up 

the frequency band, it will stop automatically once a station has been found.  

3.

To activate manual search, repeatedly press the

◀

I

◀

or 

▶▶

I

button. 

4.

To  select  audio  mode,  press  the 

SELECT

  button  to  toggle  between  the  “Auto”  or  “Mono” 

selection.  

Note:

  The radio will automatically switch between stereo and mono mode, but you can override this 

and switch this function manually which is helpful for poor signal reception.

In either DAB or FM, you can store up to 10 stations to the favourite presets; this will enable you to get 
direct access to your favourite stations.
1.         To  store  a  preset,  first  tune  to  your  desired  station,  then  press  and  hold  the 

PROGRAM

  button 

until the display shows the preset number and flash. (F. 9)

    STORING AND RECALLING PRESET STATIONS