- 15 -
Operating Instructions
During Stand By Mode, Press SNOOZE button on top panel or remote
control once to activate the display from Dimmer (Default in Stand By
mode) to Brightness mode for 9 sec. Then the display will return to
Dimmer mode automatically.
RESETTING
If the system does not have any respond, you may have experienced a
severe electric shock (ESD) or a power surge that triggered the internal
computer to shut down automatically. If this occurs, simply disconnect
the main power and connect the main power again after one minute.
Note: Although disconnect the power will unlock the internal computer
after a power surge, it will also erase all of the settings. After turning
‘On’ the unit, you will need to reset the settings again.
Back Up Function
If the AC supply is interrupted, the
clock display and Radio preset
stations will go off and all settings
will be cancelled. To back up the
clock and preset stations, insert two
“AA” size batteries (not supplied) in
the battery compartment in the base
of the unit. It is not function to alarm
clock setting. The backup battery is
not iPod operation.
Note: Always use alkaline type battery
and always remove the battery if the
unit is not to be used for an extended
period of time.
