Sanyo DP19649 - 720p 18.5" LCD HDTV, Owner'S Manual

18

Starting setup

The Starting Setup menu appears the first time 

you turn on the TV, and assists you to select the 

menu language, specify the Air/Cable setting, 

and program your channels automatically.
IMPORTANT: Make sure that the antenna or cable 

TV system connection is made!

1

To turn on the TV, press 

POWER

 (POWER 

indicator on the front of the unit changes green. 

It may take approx. 10 seconds for a picture to 

appear on screen.). The starting setup function 

begins. Press

or

to select your desired 

language.

Automatic Search

Start

Auto Setup

Language

English

Signal Type

Cable

: Adjust

: Select

2

Press

or

to select “Signal Type”, then 

press 

or

to select “Cable” or “Air”.

3

Press

or

to select “Automatic Search”, 

then press

or 

ENTER

. 

4

Now the “Auto Setup” starts. After the starting 

setup is completed, the TV channel appears on 

the screen.
• Depending on the reception condition, it may 

take from 15 minutes to 30 minutes to complete 

memorizing digital cable channels. Please be 

patient.

NOTE:

If you press 

EXIT 

in the process of “Auto Setup”, 

the Starting Setup stops and changes to the normal 

screen.
When you make a menu selection, your changes 

occur immediately. You do not have to press 

EXIT 

to 

see your changes.

When you are finished programming the menus, 

press 

EXIT

.

TV operation

1

To turn on the TV, press 

POWER

.

(POWER indicator on the front of the unit 

changes green. It may take approx. 10 seconds 

for a picture to appear on screen.)

2

Adjust the volume level by pressing 

VOL +

 or 

–

 . 

The volume level will be indicated on the screen 

by blue bars. As the volume level increases, so do 

the number of bars. If the volume decreases, the 

number of blue bars also decreases.

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 21).

4

Press the 

Direct Channel Selection (0-9, –)

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)

•

•

•

TO SELECT ANALOG CHANNELS

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 

2

, then press 

ENTER

.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 

1

, 

2

, then 

press 

ENTER

.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 

1

, 

2

, 

0

, then 

press 

ENTER

.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the 

– 

button, 

followed by the remaining number.

Example, to select channel 015-001, press 

0

,

 1

,

5

,

 –

, 

0

,

 0

,

 1

, then press 

ENTER

.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “Digital channel signal strength is low”  

will be displayed on the screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will 

be displayed on the screen.

•

•

•

VHF/UHF/CABLE CHANNELS

Air

Cable

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

NOTE:

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected to 

your LCD TV, such as a VCR player, press

 INPUT 

SELECT

, then press 

 /   or corresponding 

Number buttons (0-4)

, then press 

ENTER

. You can 

select TV, Video, Component, HDMI or PC depending 

on which input jacks you used to connect your 

devices.

Source Selection

[0-4]:Select

0.TV

1.Video

2.Component

3.HDMI
4.PC

CH +/-

Press and release 

CH +/-

. The channel automatically 

stops at the next channel set into memory.

For proper operation, before selecting channels, they 

should be set into the memory. See “Memorizing 

channels” on pages 21 and 22.

•

•

37I0521A_EnSp.indb   18

37I0521A_EnSp.indb   18

3/24/09   4:20:08 PM

3/24/09   4:20:08 PM