9
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
DVD OR VCR CONNECTED TO VIDEO1 JACKS
VIDEO1 (COMPOSITE-YELLOW)—
A
Good Picture or
(S-VIDEO)—
A Better Picture
CONNECTING A VCR OR DVD TO THE DTV
DVD or VCR
DTV VIDEO1 JACKS
1
Connect a Composite Cable to the VIDEO1
Yellow, White, and Red AV jacks as shown.
2
2
OPTIONAL
Connect DVD to the DTV S-Video In Jack, if avail-
able on your external equipment.
Note: S-Video jack connection overrides a Video jack
connection (VIDEO1).
3
Press
INPUT
to select
Video 1
to view the DVD
or VCR program.
1
AV
JACKS
S-VIDEO
JACK
(OPTIONAL)
2
2
REMOTE CONTROL
3
IMPORTANT FACTS: Don’t be confused by the
phrase “Available in High-Definition.”
Compos-
ite jacks offer only 480i (SDTV) resolution.
STEREO AMPLIFIER
BACK VIEW OF DTV
1
Connect a Stereo Amplifier to the DTV Audio Out
jacks as shown.
Note:
Do not
connect external speakers directly to
the DTV.
1
CONNECTING A STEREO AMPLIFIER
TO THE DTV
AUDIO OUT (FIXED ANALOG) JACKS
STEREO AMPLIFIER CONNECTED TO
ANALOG AUDIO OUT JACKS
OPERATING TIPS:
Position your DTV at least 2 feet from stereo
speakers. The magnets in the speakers may
affect the picture quality.
For Mono VCR (Single Audio Jack), connect VCR
Audio Out to DTV Audio (L) Input.
“No Signal” will appear randomly on the screen
when no signal is detected at the VIDEO1 video
jack.
VIDEO1 (Continued on page 10.)
