BACK VIEW
OF DTV
2
3
SET-TOP BOX
(Can be a Digital Satellite Receiver,
DVD
PLAYER,
or similar digital device.)
What you will need for connections:
DVI to HDMI Cable – 1
Audio Cable – 1
REMOTE CONTROL
5
4
1
Switch off DT V and external equipment before con-
necting cable.
(Cable is not supplied.)
2
Connect the STB DVI Output to a “DVI to HDMI
Cable;” then connect the cable to the DTV’s HDMI
input.
NOTE: Check with your local electronics store for a
DVI to HDMI Cable that matches your equip-
ment and the DTV.
3
Connect the STB Audio L / R to the DTV’s
VIDEO3 Audio L / R.
4
The DTV must be turned on first, press
POWER
. Then
turn on your external equipment.
5
Press
INPUT
to select
HDMI to view a digital program.
CONNECTING STB WITH DVI
OUTPUT TO HDMI INPUT
Press the
INPUT
key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.
With a DVI connection, make sure you connect Audio out to
the TV’s VIDEO3 Audio In.
Because the VIDEO3 audio jacks are used to receive the
audio from the DVI device, these video jacks cannot be used
when a DVI device is connected.
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
Dolby
®
Digital Audio provides 5.1 channels of surround
sound (five full-range channels [5] and one low-frequency
effect channel [.1]). A fiber optics cable is used to carry
the 5.1 surround sound (for low-noise signal transfer).
BACK VIEW
OF DTV
OPTICAL
DIGITAL CABLE
1
Using a Fiber Optics cable, connect the DTV’s Digital
Audio Output to the Digital Audio Input of a Multi-
Channel Receiver.
(Fiber optics cable is not supplied.)
2
Press
POWER
to turn on the DTV, then turn on exter-
nal equipment.
NOTES:
When making the connection, do not pinch or kink the fiber
optics cable.
Red light visible at the Digital Audio Output does not nec-
essarily indicate that Dolby
®
Digital 5.1 audio is available.
Digital audio is made up of light pulses that the human eye
cannot detect. Dolby
®
Digital 5.1 audio is available at the
Digital Audio Output only when received as part of a Digital
signal.
What you will need for connections:
Optical Cable – 1
MULTI-CHANNEL RECEIVER
1
REMOTE CONTROL
2
CONNECTING DIGITAL AUDIO OUT
TO A MULTI-CHANNEL RECEIVER
12
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
DIGITAL AV CONNECTIONS
