INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
–
Do not mix old batteries with new ones or mix different types of
batteries together.
–
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
REMOTE CONTROL KEYS
Power Key—
Press to turn TV ON or OFF.
Input Key—
Press to select the program source to watch:
TV signal or signal from DVD Player or other equipment
you have connected to the AV jacks.
Number Keys—
Press two keys to select a channel.
Example
: Press
0
then
6
to select channel 6. For cable
channels 100 through 125, press and hold the
1
key until
C1– – appears. Then press the other two numbers.
Caption Key—
(See page 12.)
Menu Key—
Use this key with the
and
– +
keys to
navigate and adjust features of the on-screen menu system.
(See pages 10 ~ 12.)
Channel Scanning (
CH
) and Volume
(
VOL
– +)
Keys—
Press to scan through the channels in memory and
to adjust the volume.
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
(Continued on page 10.
)
USING THE
REMOTE CONTROL
Be sure batteries are installed correctly.
Point the remote control toward the TV. Objects between the remote
control may cause misoperation of the remote control function.
Cannot select channel with number keys. Press “ 0 ” in front of
numbers 1~9. Example: Channel 05.
Adjusting the volume level: Flashing Right arrow indicates volume is
increasing and flashing Left arrow indicates volume is decreasing.
9
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
Point towards TV
1
2
3
4
5
6
7
8
9
0
MUTE
MENU
CAPTION
SLEEP
RECALL
RESET
INPUT
POWER
DISPLAY
12
3
45
6
78
9
0
CH
CH
VOL
VOL
