Sanyo DSR-3709P Instruction Manual Download

Page: 9 / 126

NAMES AND FUNCTIONS OF PARTS

English

INTRODUCTION

11. [PLUS] button and indicator (

P.20)

The [PLUS] button is used to enlarge video from a single
camera to quad screen size during multi 9 or multi 16
screen display.
For DSR-3709P, this operation is available only when in
multi 9 screen display.

12. [MENU] button and indicator

The [MENU] button is used to display the menu screens
(i.e., setting screens), and the indicator lights up while any
of these screens is being displayed.

13. [EXIT/OSD] button and indicator

EXIT

The [EXIT/OSD] button is used to exit the main menu or a
sub-menu. When a menu is displayed, the indicator turns
off; when the menu is closed and the normal display is
restored, the indicator lights up.

OSD (

P.16)

Each time the [EXIT/OSD] button is pressed while the
digital video recorder is recording, playing, or stopped, the
operating display location moves in the order of top of
screen, bottom of screen, to hidden; furthermore, the
indicator lights up when this information is being displayed.

14. [PLAY/STOP] button and indicator (

P.26)

When the [PLAY/STOP] button is pressed, a recording
from the normal recording area or alarm recording area is
played and the indicator lights up. When pressed during
playback, this button stops the digital video recorder.

15. [ZOOM] button and indicator (

P.19, 27)

When the [ZOOM] button is pressed during monitoring or
playback on a full screen, a portion of the playback video is
magnified and the indicator flashes.

16. [SEARCH] button and indicator (

P.31)

When the [SEARCH] button is pressed while the digital
video recorder is recording or stopped, the search menu is
displayed and the indicator lights up. The search menu
can be closed by pressing this button once again.

17. [STILL] button and indicator (

P.28)

When the [STILL] button is pressed during playback, the
current frame is displayed as a still image and the indicator
lights up. Playback can be resumed by pressing this button
once again.

18. [SEQUENCE] button and indicator (

P.21)

The [SEQUENCE] button can be pressed during
monitoring to automatically switch between screen display.
When pressed, the indicator begins flashing and the
display is changed automatically. The lighting condition of
CAMERA SELECT indicators also changes in response to
the screen display.

19. [COPY] button and indicator (

P.39)

The [COPY] button is used to copy recorded video to the
hard disk’s archive area, to a CompactFlash card, CD-R/
RW or to a Microdrive.
The indicator lights up during the copy process.

20. [SHUTTLE HOLD] button and indicator (

P.26)

The [SHUTTLE HOLD] button is used to lock shuttle dial
operation for a constant speed of playback or slow playback.
The indicator lights up while the shuttle dial is locked.
When a password has been set, furthermore, this button
can be pressed for at least three seconds to activate the
security lock.

21. [REC/STOP] button and indicator (

P.23)

The [REC/STOP] button is pressed to start normal
recording, and the indicator lights up during this process.
Furthermore, pressing this button for at least three
seconds stops recording and turns off the indicator.

SEARCH