114
English
GENERAL SET
3
INTRODUCTION
SE
TTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
Use the following procedure to set a warning buzzer to sound
for alarms or when hard disk space becomes insufficient.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2
Turn the jog dial to select “3.GENERAL
SET” and then turn the shuttle dial
clockwise.
The <GENERAL SET> screen is displayed.
3
Turn the jog dial to select “2.BUZZER
SET” and then turn the shuttle dial
clockwise.
The <BUZZER SET> screen is displayed.
(1) ALARM (default setting: OFF)
Sounds a buzzer when an alarm occurs.
(2) DISK FULL (default setting: ON)
Sounds a buzzer when overwriting is not permitted and the
hard disk capacity becomes insufficient.
(3) DISK ERROR (default setting: ON)
Sounds a buzzer accompanied with a warning message,
when an abnormal condition has occurred in the hard disk
drive.
(4) LOCK WARNING (default setting: ON)
Sounds a buzzer if a button is pressed while the security lock
is on. Specifically, the buzzer sounds twice with an interval of
approximately 0.5 seconds.
(5) KEY IN (default setting: OFF)
Sounds a buzzer when a button is pressed.
(6) NON REC (default setting: OFF)
Sounds a buzzer when recording is stopped.
(7) DISK TEMPERATURE (default setting: ON)
Sounds a buzzer accompanied with a warning message,
when the temperature has exceeded a given value in the hard
disk drive.
z
Setting is invalid with the hard disk in a RAID unit.
z
Select “OFF” if you use hard disks other than those
designated by SANYO, as this function may not properly
work on them.
4
Turn the shuttle dial clockwise.
“OFF” flashes for “ALARM”.
5
Turn the jog dial to select “ON” or
“OFF” and then turn the shuttle dial
clockwise.
The cursor moves to “DISK FULL”.
[Settings] (
indicates default setting)
6
Use the same procedure to set the other
items to “ON” or “OFF”.
7
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
z
To stop a buzzer, press any button or turn either the jog
dial or shuttle dial.
Setting the buzzer
MENU
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
DISK TEMPERATURE: ON
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Setting
Description
OFF
The buzzer does not sound when an alarm
occurs.
ON
The buzzer sounds when an alarm occurs.
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
DISK TEMPERATURE: ON
<BUZZER SET>
ALARM : ON
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
DISK TEMPERATURE: ON
EXIT/OSD
Summary of Contents for DSR-5709P
Page 158: ......
Page 159: ...Manual for Remote Operation by Network Connection ...
Page 235: ......
