194
English
RECORD SET
3
INTRODUCTION
S
ETTINGS
N
ETW
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
Use the following procedure to set the recording conditions to
be used for pre-alarm. (
J
P.168)
10
Set “PRE-ALARM RECORDING” to
“ON” or “OFF”.
[Settings] (
indicates default setting)
z
If “ALARM RECORDING” is set to “OFF”, the PRE-ALARM
RECORDING setting is displayed as “**” and cannot be
set.
11
Set “REC RATE” to the desired
recording rate.
[Settings] (
indicates default setting)
The letter “A” is displayed in front of recording rates that can
be set for audio recording.
z
When mirroring is set to "ON", configurable recording rates
are limited.
z
When only one camera is connected, recording is
performed at 25 FPS even if 50 or 100 FPS are set.
z
When two or more cameras are connected and 50 or 100
FPS is set, the actual recording rate is roughly the
recording rate divided by the number of cameras.
(Example: When 8 cameras are connected and the
recording rate setting is 100 FPS, the actual recording rate
is 12.5 FPS)
12
Set “DURATION” to the desired pre-
alarm recording duration.
[Settings] (
indicates default setting)
Use the following procedure to set the alarm triggers (i.e.,
launch signals), which function as operation conditions for
alarm recording.
13
Set “ALARM TRIGGER” to the desired
launch signal for alarm recording.
[Settings] (
indicates default setting)
z
External alarm detection:
This is used to describe input of an external detection
signal from a door switch or the like to the unit’s ALARM IN
terminal.
z
Motion sensor detection:
This refers to detection of motion on the monitor in
accordance with motion sensor settings.
z
The motion sensor settings are made on the digital video
recorder.
14
Click [SAVE].
The setting is saved.
Setting pre-alarm recording.
Setting
Description
OFF
Pre-alarm recording is disabled.
ON
Pre-alarm recording is enabled.
Setting
Description
A100, A50, A25, A16.67,
A12.5, A8.333, A6.25,
A5, A4.167, A3.571,
A3.125, A2.778, A2.5,
A2.273, A1.923, A1.667,
A1.471, A1.316, A1.19,
A1.087, A1
Recording is performed at the
selected recording rate (unit:
FPS).
Setting
Description
5SEC, 10SEC, 20SEC,
40SEC,
1MIN, 2MIN,
3MIN, 4MIN, 5MIN, 10MIN,
15MIN
Records for the set duration.
Setting alarm triggers
Setting
Description
ALARM
Starts recording when an external alarm is
activated.
SENSOR
Starts recording when a motion sensor is
activated.
ALARM AND
SENSOR
Starts recording when both an external alarm
and a motion sensor are activated
simultaneously.
ALARM OR
SENSOR
Starts recording when an external alarm or a
motion sensor is activated independent of the
other.
Summary of Contents for DSR-5709P
Page 158: ......
Page 159: ...Manual for Remote Operation by Network Connection ...
Page 235: ......
