Sanyo DSR-5709P Instruction Manual Download

Page: 214 / 236

DVR VIEWER2

English

213

The image files are not displayed when the Viewer Software is
run. Specify and open the playback file through the procedure
below.

Click

in the toolbar.

Or, click “Open” in the file menu.
The [Open] dialog is displayed.

Click .

The [Browse for Folder] dialog is displayed.

Specify the folder in which the images

are saved and click [OK].

The folder specified in the [Open] dialog is displayed.

Verify the displayed folder and click

[OK].

The image file loads.

Screen display

The first image of the loaded file is initially displayed on full
screen.

Refer to the appropriate pages for details about the operations
of the Viewer Screen.

Switching the display pattern (1/4/9/16 screen) of the
playback images (Refer to P214)

Selecting the channels displayed on each screen (Refer to
P214)

Operating panel functions (Refer to P215)

Opening Image Files

01 09/29/2005 16:28:24

Summary of Contents for DSR-5709P













































































































































































































































Search results

Summary of Contents for DSR-5709P

Reviews:

Related manuals for DSR-5709P

Brands by name

Popular brands

Sanyo DSR-5709P, Instruction Manual

Search results

Summary of Contents for DSR-5709P

Reviews:

Related manuals for DSR-5709P

Brands by name

Popular brands