R-AUDIO-L
VIDEO
AUDIO
VIDEO
INPUT
1
BASIC CONNECTIONS
Connecting to a Conventional TV (Example 1)
Connect the DVD video player to your TV.
DVD video player
To AC 120V, 60Hz
To AUDIO OUT jacks
To VIDEO OUT jack
(Yellow)
Audio/Video cable (supplied)
To audio input jacks
To video input jack
(Yellow)
TV with Audio/Video input jacks
Notes:
•
Please refer to your TV instruction manual.
•
When you connect the DVD video player to your TV, be sure
to turn off the power and disconnect both units from the wall
outlet until all the connections have been made.
•
If your TV has one audio input jack, connect the AUDIO OUT
jacks of the DVD video player to a Y-cable adaptor (not
supplied), then connect it to the TV Audio input. Please con-
sult your local audio/video dealer.
•
Do not connect the DVD video player to a VCR directly. The
playback picture will be distorted because DVD video discs
are copy protected.
(White) L
(Red) R
(Red) R
(White) L
S-VIDEO IN 1
Using the S-VIDEO jack
Note:
Please follow the steps before turn on the power.
1. If your TV has the S-video input jack, connect the DVD
video player with the S-video cable (not supplied). (The
VIDEO OUT jack connection is not necessary.)
You can enjoy clearer picture playback.
2. Set the VIDEO OUT SELECT switch to the
S-VIDEO
position.
3. You also need to connect the left and right audio cables
(not supplied) to the AUDIO OUT jacks of DVD video player
and the Audio input jacks of the TV.
DVD video player
To S-video input jack
To S-VIDEO
OUT jack
*S-video cable
(not supplied)
*Please consult your local audio/video dealer.
TV
COMPONENT VIDEO INPUT
Y
P
B
P
R
Using the COMPONENT VIDEO OUT jacks
Note:
Please follow the steps before turn on the power.
1. If your TV has the component video input jacks, connect
the DVD video player to these jacks. (The VIDEO OUT or
S-VIDEO OUT jack connection is not necessary.)
You can enjoy high quality picture playback.
2. Set the VIDEO OUT SELECT switch to the
COMPONENT
position.
3. You also need to connect the left and right audio cables
(not supplied) to the AUDIO OUT jacks of DVD video player
and the Audio input jacks of the TV.
4. Set the DVD video player to
the INTERLACE position.
See page E15.
*Component video cable (not supplied)
TV
Green
Blue
Red
Red
Blue
Green
-E8-
DVD-SL33/CA(English)
13/06/2003, 10:06
9