– 14 –
EN
The following chart describes behavior of the
PAIR
indicator and to-do’s for playback, according to each behavior sequence of
the
PAIR
indicator.
PAIR indicator behavior
(The arrow indicates the passage of time.)
The current status of Bluetooth and the procedures to
complete Bluetooth connection for Bluetooth playback.
1
Blinks twice
g
light off
g
repeats
Waiting for a new Bluetooth compatible device to connect (status:
pairing). On the Bluetooth compatible device to connect, select the
soundbar’s name
(*1)
, then connect.
2
Remains lit
A Bluetooth compatible device is connected.
Music can be played from the connected Bluetooth compatible
device
(*2)
.
3
Blinks slowly
No Bluetooth compatible device is connected. To reconnect with
the last connected Bluetooth compatible device, press
BLUETOOTH
(*2)
.
4
Blinks rapidly
Trying to connect with the last connected Bluetooth compatible
device. Enable Bluetooth on the last connected Bluetooth compatible
device and wait a moment
(*2)
.
5
Remains unlit
Either another audio input is selected or the soundbar is in standby.
If all indicators are off, press
to turn on the soundbar. When all
indicators except the blue LED are lighting up or blinking, press
BLUETOOTH
. The (Bluetooth) indicator will start blinking or light up.
Follow 1-4 in this chart.
*1
This soundbar’s name is “SANYO_FWSB405F” or “2.0ch Soundbar”. If this soundbar has already been registered to a
Bluetooth compatible device and the connection fails, delete it (or deactivate it), then press
PAIR
and select this
soundbar’s name to connect.
*2
To play music from a different Bluetooth compatible device, press
PAIR
, then select this soundbar’s name on the
Bluetooth compatible device to connect
(*1)
.
NOTE(S)
•
If reconnecting the Bluetooth compatible device to the soundbar fails, delete the registered profile of this soundbar
from the Bluetooth compatible device, then perform pairing again.
This unit can store up to 4 device profiles.
•
The music streaming may be interrupted by obstacles between the device and soundbar, such as wall, metallic
casing that covers the device, or other devices nearby that operate in the same frequency.
•
If you want to connect your soundbar with another Bluetooth compatible device, press
PAIR
to disconnect the
current connection.
•
Depending on your Bluetooth compatible device, different behaviors may appear.
See your Bluetooth compatible device’s user manual for details.
•
The operational range between the soundbar and a Bluetooth compatible device is approximately 30 feet (10 m), if
there is no interference or obstacles.
