background image

Appendix: Installing the Stand   

Cautions:

Make sure that you handle your TV very carefully when attempting assembly or removal of the stand.  If you are not 
sure of your ability to do this, or of your ability to use the tools necessary to complete this job, refer to a professional 
installer or service personnel. The manufacturer is not responsible for any damages or injuries that occur due to 
mishandling or improper assembly.

When using a table or bench as an aid to assembly, make sure that you put down a soft cushion or covering to prevent 
accidental scratching or damage to your TV's finish.

The speaker is not intended to support the weight of your TV.  Do not move or handle your TV by the speaker. This 
can cause damage to your TV that is not covered by the manufacturer's warranty.

Before attempting assembly or removal of the stand, unplug the AC power cord.

You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend 
to mount your TV on a wall or other vertical surface, you must remove the stand column.

If the stand is provided, please read these instructions thoroughly before attempting this installation.

NOTE:

The  appearance  of  this  product  in  these  illustrations  may  differ  from  your  actual  product,  and  is  for 
comparative purposes only.

To  remove  the  stand  from  the  TV,  just  detach  the 
screws from the stand base. 

To install the stand:

1.

 Remove the stand from the box and place it on a table or 

bench.

   You must pay attention to the direction of the stand. The 

wide portion of the stand should go towards the front of 
the TV.

2.

 Lay your TV flat (screen down) on the edge of a table or 

bench. Make sure that you put down a soft cushion or 
cloth so that your TV is not scratched.

3. 

Put the stand close to the TV back, align the stand with 

the  TV  by  moving  the  stand  steadily  until  the  Stand 
Locators align with the locating grooves on the stand. 
And align the screw holes on the TV back with the holes 
in  the  stand,  then  secure  the  stand  to  the  TV  with 
provided  screws .

Installing the stand 

39

Stand 

 Locators

Secure with 

 three screws

Summary of Contents for LCD-24XR11F









































Reviews: