Sanyo LED-19XZ11, Service Manual

would be unable to work and no way to get it repaired.   
If the connection wires, connections or components fixed by the thermotropic glue need to 
disengage when service, please soak the thermotropic glue into the alcohol and then pull them 
out in case of dagmage. 
2.11 Special care must be taken in transporting or handling it. Exquisite shock vibration may lead 
to breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strong 
case before the transportation or handling. 
2.12 For the storage make sure to put it in a place where the environment can be controlled so as 
to prevent the temperature and humidity from exceeding the limits as specified in the manual. For 
prolonged storage, it is necessary to house it in an anti-moisture bag and put them altogether in 
one place. The ambient conditions are tabulated as follows:

Temperature 

Operation range 

            5

 ~ +

35

 o

C 

Storage range 

-20 ~ +60 

o

C 

Humidity 

Operation range 

20% ~ 85% 

Storage range 

10% ~ 90% 

2.13 Display of a fixed picture for a long time may cause a permanent after-image on the screen, 
as commonly called “ghost shadow”. The degree of the after-image varies with the maker of LCD 
screen. This phenomenon doesn’t represent failure. This “ghost shadow” may remain in the 
picture for a period of time (several minutes). But when operating it please avoid displaying still 
picture in high brightness for a long time. 
 

3. Installation precautions 

3.1 The front panel of LCD screen is made of glass. When installing it please make sure to put it in 
place. 
3.2 For service or installation it’s necessary to use specified screw lest it should damage the 
screen. 
3.3 Be sure to take anti dust measures. Any foreign substance that happens to fall down between 
the screen and the glass will affect the receiving and viewing effect   
3.4 When dismantling or mounting the protective partition plate that is used for anti vibration and 
insulation please take care to keep it in intactness so as to avoid hidden trouble. 
3.5 Be sure to protect the cabinet from damage or scratch during service, dismantling or 
mounting.