q) Factory menu item:
Other Setting->AUDIO Curve Setting
, for sound curve adjustment; if
without special customer requirements, the item need not adjustment commonly for it has been
preset by software;
r) Factory menu item:
Software Update
,
for software upgrade from USB port; at any channel,
insert USB memory device, select option “
YES
”, software will auto-search file “
MERGE.bin
” in
USB memory device to begin upgrade; please execute item “
EEPROM Init
” before adjustment
again, for old data still remain in E
2
PROM after software upgrade.
4.1.3 ADC calibration of analog component YPbPr
a) Switch to analog component YPbPr channel;
b) Press
key
“
SOURCE
”, then press keys “
2
,
5
,
8
,
0
” in turn to enter into initial factory menu;
c) Move cursor to item “
ADC ADJUST
” and press key “
OK
” to enter into inferior factory menu;
d) Input analog component Y/Pb/Pr signal
（
VG848 Timing 972(1080i), Pattern 918(8 Color & 16
Grey)
）
; move cursor to item “
MODE
”
，
press keys “
▲
” and “
▼
” to select item “
YPbPr
”
，
then
move cursor to item “
AUTO ADC
” and press key “
OK
” to begin auto-adjustment until prompt
“
Success
” displays which means successful auto-calibration;
4.1.4 ADC calibration of analog RGB
a) Switch to analog RGB channel;
b) Press
key
“
SOURCE
”, then press keys “
2
,
5
,
8
,
0
” in turn to enter into initial factory menu;
c) Move cursor to item “
ADC ADJUST
” and press key “
OK
” to enter into inferior factory menu;
d) Input analog RGB signal
（
VG848: Timing 856
（
1024×768/60 Hz
）
, Pattern 914(Color Temp.)
）
;
move cursor to item “
MODE
”
，
press keys “
▲
” and “
▼
” to select item “
RGB
”
，
then move cursor
to item “
AUTO ADC
” and press key “
OK
” to begin auto-adjustment until prompt “
Success
”
displays which means successful auto-calibration.
4.2 White balance adjustment”
Unless specified by customer:
a)
＜
26” models:
Default color temperature “
Cool
” is
10000K
and its chromatic coordinates is (
280
,
288
); color
temperature “
Normal
” is
8000K
and its chromatic coordinates is (
295
,
305
); color temperature
“
Warm
” is
6500K
and its chromatic coordinates is (
323
,
329
);
b)
≥
26” models:
Default color temperature “
Cool
” is
12000K
and its chromatic coordinates is (
272
,
278
); color
temperature “
Normal
” is
9300K
and its chromatic coordinates is (
285
,
293
); color temperature
“
Warm
” is
6500K
and its chromatic coordinates is (
323
,
329
);
4.3 Adjustment procedure
TV set should be working over 30 mins to be in stabler state before white balance adjustment; Use
white balance apparatus CA-210 and switch to its BBY channel;
a) Switch to HDMI1channel;
b) Press
key
“
SOURCE
”, then press keys “
2
,
5
,
8
,
0
” in turn to enter into initial factory menu;
c) Move cursor to item “
W/B ADJUST
” and press key “
OK
” to enter into inferior factory menu;
d) Input
HDMI
signal (
VG-848 Timing:856(1024×768/60 Hz)
，
Pattern:921(Gray 16 step(H)
); move
cursor to item “
MODE
”, press keys “
▲
” and “
▼
” to select item “
HDMI1
” or other HDMI
channels,
then move cursor to item “
Temper..
” and press keys “
▲
” and “
▼
” to select item “
Normal
”;
e) Fix item “
G-GAIN
”, adjust items “
R-GAIN
,
B-GAIN
” to set chromatic coordinates of
13
th
scale as
the value of temperature “
Normal
”;
Summary of Contents for LED-32XR10FH
