72
33
SPECIFICATIONS
Name
Ultra-Low Temperature Freezer
Model
MDF-U7386S
MDF-U7386SC (for U.S.A. only)
External dimensions
W1130 x D867 x H1990 (mm)
Internal dimensions
W870 x D600 x H1280 (mm)
Effective capacity
668 L
Exterior Painted
steel
Interior Painted
steel
Outer door
Painted steel
Inner door
ABS resin panel with stainless frame, 2 doors
Shelf
Stainless steel, 3 shelves (adjustable)
W848 x D533 (mm), Load; 50 kg/shelf
Access port
17 mm diameter, 3 locations (back, bottom left/right corner)
Insulation
Rigid polyurethane foamed-in place
Compressor
Hermetic type, Output; 1100 W (high stage side), 1100W (low stage side)
Evaporator
Tube on sheet type
Condenser
Fin and tube type (high stage side), Shell and tube type (low stage side)
Refrigerant
R-407D (high stage side), R-508 (low stage side)
Temperature controller
Microcomputer control system
Temperature display
Digital display
Thermal sensor
Platinum resistance (Pt 1000
㱅
)
Alarm
High temp. alarm, Low temp. alarm, Power failure alarm
Filter check, Battery alarm
Remote alarm contact
Allowable contact capacity: DC 30V, 2A
Battery
Nickel-metal-hydride battery, DC6V, 1100mAh, Auto-recharge
Accessories
1 set of key, 1 scraper
Weight
355 kg
360 kg
Voltage booster
None
Built-in
Optional component
Inventory rack (IR-220U)
Automatic temperature recorder (MTR-G85)
Back-up system (CVK-UB2): LCO
2
Note
:
• Design or specifications will be subject to change without notice.
• The battery for power failure alarm is an article for consumption. It is recommended that the battery will be
replaced about every 3 years. Contact Sanyo sales agency at the time of replacement of the battery for recycling.
PERFORMANCE
Cooling performance
-86
o
C at the center of the chamber (ambient temperature; 30
o
C, no load)
Temperature control range
-50
o
C to -86
o
C (ambient temperature; 30
o
C, no load)
Power source
220V, 50Hz
220V, 60Hz
230V, 50Hz
240V, 50Hz
Rated power consumption
1080 W
1210 W
1140 W
1120 W
Noise level
49 dB [A] (background noise; 20 dB)
Maximum pressure
2.7 MPa
Note
: The unit with CE mark complies with EC directives 89/336/EEC, 93/68/EEC and 73/23/EEC
