background image

4 DIVISIONS SPLIT SCREEN OPERATIONS

(VCR playback on monitor 1)

c

 button:

will move the frame to the right

SHIFT button + 

c

 button:

will move the frame to the left

l

 button:

will move the frame down

SHIFT button + 

l

 button:

will move the frame up

Example 3: To zoom in the recorded image from camera 4

and set the zoom range

You can select the portion of the recorded image to zoom in. The default zoomed in
area is the centre of the image, but if a different zoom range is selected it will be
memorized until changed or cancelled.

1

Press the ZOOM button.
The ZOOM indicator flashes and the zoomed in image display mode is selected.

2

Press the camera select 4 button for about 3 seconds.
In full screen mode, “Z” (flashes) and the zoom range frame are displayed.

NOTE: If during the zoom range setting, the frame displayed in full screen

display mode is not moved for about 10 seconds, the display mode will
automatically return to 4 divisions split screen display mode.
To return to the setting mode, press the camera select 4 button again, for
about 3 seconds.

3

Press the 

c

 (or 

l

) button to move the zoom range frame to the desired

area of the image.

4

Press the camera select 4 button.
The area selected by the zoom range frame is now zoomed in.
If necessary, follow the same procedure to set the zoom range for the other
cameras.
NOTE: You can switch from zoomed in mode to normal (no zoom) mode by

pressing the camera select 4 button repeatedly.

To cancel the zoomed in image display mode.
Press the ZOOM button.

Example 4: To freeze the zoomed recorded in image from

camera 4

1

Press the ZOOM button.
The ZOOM indicator flashes and the zoomed in image display mode is selected.

2

Press the camera select 4 button.
The camera 4 indicator flashes, the recorded image from camera 4 is zoomed in,
and “Z” flashes on-screen.

3

Press the STILL button.
The STILL indicator flashes and the ZOOM indicator lights.

4

Press the camera select 4 button.
The camera 4 indicator flashes, the zoomed in recorded image from camera 4 is
frozen, and “SZ” flashes on-screen.

NOTE: A still image cannot be zoomed in.

To cancel the still and zoomed in image display mode.
Press the camera select 4 button, then press the STILL button.
Press the camera select 4 button, then press the ZOOM button.

To cancel all the still image displays and zoomed in image displays
Multiple still image displays and the zoomed in displays can be set from the 4
divisions split screen, to cancel all at once, press the STILL button, then press
the ZOOM button.

4

ZOOM

1
2

VCR

LIVE

SHIFT

3

Z

4

4

4

ZOOM

4

STILL

L8FH5/XE (MPX-CD4P, MD4P GB) 1999. 12. 2

English

17

Summary of Contents for MPX-CD4P










































Reviews: