SPECIFICATIONS
Signal format
: Based on NTSC color signal standard
Camera signal input synchronization
: Asynchronous
Camera input terminals (CAMERA)
: VS/VBS, 1.0 Vp-p/75
Ω
, BNC connector x 8
VCR input terminal (VCR IN)
: Composite input, VS/VBS, 1.0 Vp-p/75
Ω
, BNC connector x 1
VIDEO output terminal 1
(VIDEO OUT QUAD FULL)
: Composite output: Quad screen/Full screen VS/VBS, 1.0 Vp-p/75
Ω
, BNC connector x 1
VIDEO output terminal 2
(VIDEO OUT QUAD ONLY)
: Composite output: Quad screen only VS/VBS, 1.0 Vp-p/75
Ω
, BNC connector x 1
Control terminal (CONTROL)
: Push-type terminal
•
Alarm input (1 – 8)
: No voltage, make-contact switch input x 8 (Low input)
•
Remote input (RC)
: 2-wire type with resistance-based identification system, can be used with a remote control
circuit
•
Alarm output (AL)
: DC 5V, 5.7k
Ω
(Low output)
•
Switching input (SW)
: 1 low input, for switching signal from SW OUT of a timelapse VCR (as per this
manufacturer specifications)
RS-232C terminal
: 9-pin D-SUB
Monitor on-screen display
: Title (up to 10 characters), date, time selectable
Menu settings
: 9 menus screens
Video alarm sensor
: Internal, 8 channel (each camera input, selectable)
Back-up function
: Back-up for up to 30 days of the clock settings after connected for 30 hours continuously
Operations
•
Still
: Available for camera live in quad screen, full screen and zoomed in picture
Can be set using a menu to operate automatically when there is an alarm trigger
•
2x zoom
: Available for camera live in quad screen
Display automatic switching speed
: 8 settings (1, 2, 3, 4, 5, 10, 20 and 30 seconds interval) available in full screen mode and
quad screen A and B
Power
: AC 120 V, 60Hz
Consumption
: 12 W
Operating temperature range
: 5 to 40˚C
Operating humidity range
: 10 to 80%
Dimensions
: 420 (W) x 44 (H) x 325 (D) mm
Weight
: Approx. 3.4 kg
Products are subject to change in design and specifications without notice and without incurring any obligation.
L8QR5/US (MVP-85 GB) 1999. 8. 27
32
English
