background image

_       _

32

EXPLANATION OF CIRCUIT

 

 

5. KEY PCB  

  KEY PCB has various keys and remote control dimmer sensor port.

a.   3V is supplied to IC503 by IC540, key SW is taken in, and assignment of 

remote control and the data of main part key are performed.   

 

6. DVD PCB 

 

a. DVD DECODER 

  IC701 communicates with microcomputer, and playbacks DVD by DVD DECODER.

b. VIDEO DAC 

  IC751 outputs DVDRGB, Y/C signal and VIDEO signal by DVD VIDEO DAC

c. AUDIO DAC     

  IC781 outputs DVD audio through BUFFER(IC791) by DVD AUDIO DAC.  

 

 

In DVD MODE, the power supply is supplied to DVD BLOCK and SERVO PCB.

DVD BLOCK from Q611 and Q613.   5V is supplied to SERVO PCB from Q120.

The DVD signal from the microcomputer is Hi, and     3.3V and    5V are supplied to 

 

(SERVO PCB)

1. RF AMP PART(IC1101) 

  For the signal read by PICKUP, AMP is performed, and equalizing of playback RF

  signal and error signal  required  for each SERVO are generated.  

 

 

2. DSP PART(IC 1 201)  

  Digital signal  processing of the signal from RF AMP is performed, and control 

signals of PICK UP, SPINDLE MOTOR, and FEED MOTOR etc are outputted.  

  Recovery and correction of RF signal are also performed. 

 

 
3. ATAPII/F PART(IC1250)

 

  It communicates by ASIC and ATAPII/F in NAVI PCB.  

 4. MICROCOMPUTER PART(IC1151)  

    is  controlled . 

  When in NAVI MODE,    5V power supply is supplied, and operation of DVD BLOCK

Summary of Contents for NV-E7000 - Portable GPS And Mobile DVD Entertainment System





































































Reviews: