Sanyo PDG-DWT50KL User Manual Download

Page: 4 / 135

Safety Instructions

All the safety and operating instructions should be read
before the product is operated.

Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the pro-
jector.

For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool,
etc...

Do not use attachments not recommended by the manu-
facturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
child or adult, and serious damage to the projector. Use
only with a cart or stand recommended by the manufac-
turer, or sold with the projector. Wall or shelf mounting
should follow the manufacturer’s instructions, and should
use a mounting kit approved by the manufacturers.

An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven sur-
faces may cause the appliance and cart
combination to overturn.

Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to ensure reliable operation
of the equipment and to protect it from overheating.

The openings should never be covered with cloth or
other materials, and the bottom opening should not be
blocked by placing the projector on a bed, sofa, rug, or
other similar surface. This projector should never be
placed near or over a radiator or heat register.

This projector should not be placed in a built-in installa-
tion such as a bookcase unless proper ventilation is
provided.

Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of air-
conditioning equipment.

This projector should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supplied, consult your au-
thorized dealer or local power company.

Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector where
the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as open-
ing or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.

Unplug this projector from wall outlet and refer servicing
to qualified service personnel under the following condi-
tions:

a.  When the power cord or plug is damaged or frayed.
b.  If liquid has been spilled into the projector.
c.  If the projector has been exposed to rain or water.
d.  If the projector does not operate normally by follow-

ing the operating instructions. Adjust only those
controls that are covered by the operating instruc-
tions as improper adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore the projector
to normal operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in per-

formance-this indicates a need for service.

When replacement parts are required, be sure the ser-
vice technician has used replacement parts specified by
the manufacturer that have the same characteristics as
the original part. Unauthorized substitutions may result in
fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projec-
tor, ask the service technician to perform routine safety
checks to determine that the projector is in safe operating
condition.

Voor de klanten in Nederland

Bij dit produkt zijn batt e rijen ge-
leverd.
Wanneer dezeleeg zijn, moet u ze
niet weggooien maar inleveren als
KCA.