46
Controlling the Projector
✐
The timer operates by using the clock function provided in this product. Before setting the
timer, please confirm that the current date and time are set correctly. Timer and clock func-
tions are functioning using a lithium battery provided in this product. When the battery runs
down, the clock and timer functions will not operate correctly. Consult your local dealer for
the replacement of battery. The replacement must be carried out by a qualified service per-
sonnel.
Getting the current time
The displayed time is the value set when the setting page was displayed. This time
value is not updated automatically. To update the display time press the
Refresh
but-
ton.
Notes on timer setting
✐
Up to 10 timer events can be registered. Timer events always operate according to
the next valid event depending on the projector's power status. In the example
below, event 3 turns on the projector so next event 4 (also turning on projector)
will not be effective because the projector is already turned on. Similarly, when the
projector is turned off by event 5, event 6 OFF will not be effective in turning it off
again. But these secondary events (event 4 and event 6) will become effective if a
person turns off the projector (after event 3 and before event 4) or turns on the
projector (after event 5 and before event 6).
✐
When the timer events are set at the same time, the last event set will override
the previous events. For example, if there is an event like "On at 8:00 everyday"
and then new event is set like "Off at 8:00 everyday", only the last setting event is
effective.
✐
When the timer event
ON
occurs during cooling down period, this is invalid event
because of the projector cannot be turned on during this cooling down period.
Cancel the timer
To cancel the timer event press the
Delete
button next to the event you wish to
delete. Please confirm that the event is deleted from the list.
Projector Power
Event 1
ON
Event 2
OFF
Event 3
ON
Event 4
ON
Event 5
OFF
Event 6
OFF
ON
ON
Invalid event
Invalid event
Time
Summary of Contents for PJ-NET ORGANIZER POA-PN10
