OTHER FUNCTION SETTING
This projector has other function settings; Auto retract, Blue back, Display, Ceiling, Rear and Lamp age.
AUTO RETRACT
When this function is in the “On” position, the projector retracts the lens when the projector is turned off using the
LAMP POWER ON/OFF button. To protect the lens from being damaged while you are carrying the projector, you
are strongly recommended to set this function “On”. Since the lens is pulled in each time the POWER is switched off,
you need to make ZOOM and FOCUS adjustments when you turn on the projector.
BLUE BACK
When this function is in the “On” position, the projector will project a blue image without video noise on the screen
when the video source is unplugged or turned off.
DISPLAY
When this function is in the “On” position, on-screen displays always appear when adjustments are made. Although
these on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To
avoid this, you can keep back certain displays by switching this function
The followings are the displays that
you can hide.
l
Wait Display
l
Volume Display
l
Mute Display
l
Normal Display
CEILING
When this function is in the “On” position, the top/bottom
and the left/right picture reverse capability lets you project
from a ceiling-mounted projector.
REAR
When this function is in the “On” position, the left/right
picture reverse capability lets you project onto a rear
projection screen.
LAMP AGE
The Lamp age function is designed to reset the lamp replacement monitor timer. When replace the lamp, reset the
lamp replacement monitor timer for used this function.
