Problem:
The lens Is pulled In when the
POWER Is switched off.
Picture Is L/R Reversed.
Try these Solutions:
Check AUTO RETRACT function.
(See
“OTHER
SETTING” section on pages
Check Ceiling/Rear feature.
(See “OTHER FUNCTION SETTING” section on pages
Picture Is T/B inverted.
Check Ceiling feature.
(See “OTHER FUNCTION SETTING” section on pages 44 45).
Some
displays
are not seen
during the operation.
sound.
Check Display feature.
(See “OTHER FUNCTION SETTING” section on pages
l
Check audio cable connection from audio input source.
l
Adjust audio source.
l
Press the VOLUME (+) button.
l
Press the MUTE button.
Remote control unit doesn’t
work.
l
Check the batteries.
sure nothing is blocking between the remote control
sensor and remote control unit.
l
Make sure you
too far from the projector when using the
remote control unit. Maximum operate range (5 m).
Wireless mouse function does
not work.
l
Check the cable connection between the projector and the
computer.
l
Check the mouse setting on your computer.
l
Turn on the projector before you turn on the computer.