PLC-ET30L Expand Serial Command Functional Specifications
24/62
8.6 Input Control Command
8.6.1 CF_INPUT Command
Command
“CF_INPUT_%1” [CR]
%1
“1”------------------------- Select Input 1 (not switching Source)
“2”------------------------- Select Input 2 (not switching Source)
“3”------------------------- Select Input 3 (not switching Source)
“4”------------------------- Select Input 4 (Network viewer)
“UP”---------------------- Increment Input No. by 1
<with PJ-Net attached>Input1
→
Input2
→
Input3
→
Input4
→
Input1
→
- - -
<with PJ-Net unattached>Input1
→
Input2
→
Input3
→
Input1
→
- - -
“DN”---------------------- Decrement Input No. by 1
<with PJ-Net attached>Input1
→
Input2
→
Input3
→
Input4
→
Input1
→
- - -
<with PJ-Net unattached>Input1
→
Input2
→
Input3
→
Input1
→
- - -
Details
Select Input (Available only in the normal Power ON status)
This command switches only Input No, not Source. For instance, when Input 1
has been selected, receiving the command to select Input 1 does not invoke
souce-switching operation. That means it operates differently from “INPUT”
button of Projector or Remote Control.
*When selecting Input4 on a projector with PJ-Net unattached, it comes to “103”.
*When selecting Input1 on a projector with PJ-Net attached and power OFF, It
comes to “101”.
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.6.2 CF_SOURCE Command
Command
“CF_SOURCE_%1” [CR]
%1
Input 1
“DIGITAL” ----------- Select Digital Input
“ANALOG” ---------- Select Analog Input
“SCART” ------------ Select Scart Input
“HDCP” ------------- Select DVI HDCP Input
“UP” ------ Select in Analog -> Scart -> DVI -> HDCP -> Analog order
“DN” ------ Select in Analog -> HDCP -> DVI -> Scart -> Analog
order
Input 2
“VIDEO” ------------- Select Composite Video Input
“YPBPR” ------------ Select Y,Pb/Cb,Pr/Cr Input
“YCBCR” ----------- Select Y,Pb/Cb,Pr/Cr Input
“ANALOG” --------- Select RGB
“UP” --- Select in Analog -> Video -> Y,Pb/Cb,Pr/Cr -> Analog order
“DN” --- Select in Analog -> Y,Pb/Cb,Pr/Cr -> Video -> Analog order
Input 3
“AUTO” -------------- Select Composite Video Input / S-Video Input
automatically. (S-Video has priority)
“VIDEO” ---------------Select Composite Video input
“S-VIDEO” -------------- Select S-Video input
“UP” ------ Select in Auto -> Video -> S-Video -> Auto order
“DN” ------ Select in Auto -> S-Video -> Video -> Auto order
Input 4
“NETWORK”, “UP”, “DN”
*Input can not be selected, but above parameter is processed as
Acceptable.
Details
Select Source of currently selected Input (Available only in the normal Power ON
status)
When selected input does not include specified %1, error code “101” is returned and
it is not executed.
When Input No is 4 and PJ-Net power is OFF, error code “101” is returned.
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
