![background image](http://html.mh-extra.com/html/sanyo/plc-sw30-svga-lcd-projector/plc-sw30-svga-lcd-projector_owners-manual_361980009.webp)
9
Overview
Top panel
POWER
LAMP
REPLACE
WARNING
INPUT
MENU
ON - OFF
SELECT
V
O
L
U
M
E
–
V
O
L
U
M
E
+
e
w
q
u
y
t
r
i
i
POWER indicator
Flashes red until the projector gets ready to be turned
on. It turns red when the projector is in the stand-by
mode. It remains green while the projector is in
operation. (
☞
P19,37,42 )
q
POWER ON-OFF button
Turns the projector on or off. (
☞
P19 )
w
SELECT button
– Executes the selected item. (
☞
P17 )
– Expands / compresses the image in Digital Zoom
mode. (
☞
P29 )
r
MENU button
Opens or closes the On-Screen Menu. (
☞
P17 )
t
INPUT button
Selects input source. (
☞
P22,P30 )
e
Point
e
ed
d7 8
( / – ) buttons
– Select an item or adjust value in the On-Screen Menu.
(
☞
P17 )
– Pan the image in DIGITAL ZOOM +/– mode. (
☞
P29 )
– Adjust volume level. (Point
7 8
buttons) (
☞
P21 )
y
LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws
to an end. (
☞
P40 )
u
WARNING indicator
Lights red when the projector is in the abnormal
condition. This indicator also flashes red when the
internal projector temperature goes up over the
operating range. (
☞
P42 )