33
Computer Input
Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with the
Point
ed
buttons and press the SELECT button. The
confirmation box appears and then select "Yes".
Stored data can be called up by selecting "Image" in the
Image Level Selection on p. 31.
Move the red framed
pointer to any of
Image 1 to 4 where
you want to set and
then press the
SELECT button.
The confirmation
box appears, then
select "Yes".
Store item
Press the SELECT button
at this item to store the
adjusted data.
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen
Menu. Press the Point
7 8
buttons to move the red
framed pointer to the Screen Menu icon.
1
Move the red
framed pointer to the
function and press the
SELECT button.
Press the Point
ed
buttons and move the red framed
pointer to the function that you want to select and
then press the SELECT button.
2
Screen Menu
Screen Menu icon
Screen Size Adjustment
Wide
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), this
projector enters panning mode automatically. Pan the
image with Point
ed
7 8
buttons. When adjusted, the
arrows turn red. When reached to the correction limit, the
arrows disappear.
Provide the image to fit wide video aspect ratio (16 : 9) by
expanding the image width uniformly. This function can be
used for providing a squeezed video signal at 16 : 9.
Full screen
Provide the full screen image.
✔
Note:
• This projector cannot display any resolution
higher than 1600 X 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
•The image data in other than 1024 x 768 is
modified to fit the screen size in initial mode.
• True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p. 27).
Computer Input
