34
&RPSXWHU,QSXW
This projector has the picture screen resize function, which enables you to customize the image size.
Screen Menu
6FUHHQ6L]H$GMXVWPHQW
Provide the image to fit the screen size.
Normal
7UXH
Provide the image in its original size. When the original
image size is larger or smaller than the screen size
(1024 x 768), the projector enters to the panning mode
DXWRPDWLFDOO\ 8VH WKH 3RLQW ŸźŻŹ
buttons to pan
the image. When adjusted, the arrows will turn red.
When reached to the correction limits, the arrows will
disappear.
Full
Provide the full screen image.
3
1RWH
• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
• The image data in other than 1024 x 768 is
modified to fit the screen size in initial mode.
•
7UXH
and
'LJLWDO ]RRP ±
are disabled and
cannot be displayed when
480i
,
575i
,
480p
S
720p
,
1035i
or
1080i
is selected in the PC
System Menu (p. 28).
• When
7UXH
is selected in the Screen menu,
'LJLWDO]RRP
can not be selected.
1
2
Press the MENU button to display the On-Screen
0HQX8VHWKH3RLQWŸźEXWWRQVWRVHOHFW
Screen
and then press the Point
Ź
or the SELECT button.
8VHWKH3RLQWŸźEXWWRQVVHOHFWWKHGHVLUHGLWHP
and then press the SELECT button .
Custom
Provide the last stored aspect screen image.
:LGH
Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually with this
function. Press the
Point
Ź
button at
Custom adj
. and
the Custom adjustment menu is displayed on the screen,
\RXFDQXVHWKH3RLQWŸźEXWWRQVWRFKRRVHWKHLWHP
you want to adjust.
6FDOH+9
.......... Adjust the Horizontal/Vertical screen
scale.
H&V
................... When set to
On
, the aspect ratio is
fixed. The
Scale V
appears dimmed
and becomes unavailable. Adjust
Scale H
, then the screen scale is
automatically modified based on the
aspect ratio.
39
..... Adjust the Horizontal/Vertical screen
position.
Common
........... Save the adjusted scale or position
to all the inputs. Press the SELECT
button at
Common
to display a
confirmation box. To save the scale or
position, press the SELECT button at
<HV
. When
Custom
is selected, the
saved scale or position is used.
5HVHW
................. Reset the all adjusted values. Press
the SELECT button at
5HVHW
to
display a confirmation box. To reset,
press the SELECT button at
<HV
.
Custom adj.
3
1RWH
• When no signal is detected,
Normal
is set
automatically .
• The adjustable range for
6FDOH +9
and
3R9
is limited depending on the input
signal.
=RRP
Scale the image proportionally to fit the entire screen.
Either side of image may go over the screen.
Custom adj.
