0
Computer Input
Adjust the horizontal area displayed by this projector.
Press the Point
7 8
buttons to decrease/increase the
value.
Display area H
Adjust the vertical area displayed by this projector. Press
the Point
7 8
buttons to decrease/increase the value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red framed pointer to the
Store item and then press the SELECT button. Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then press the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and then
select [Yes]. All adjustments return to their previous
figures.
Mode free
To clear the stored data, move the red framed pointer to
the Mode free item and then press the SELECT button.
Move the red arrow pointer to the Mode that you want to
clear and then press the SELECT button.
✔
Note:
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected in
the PC System Menu (p.27).
Vacant Mode
Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
Close this dialog box.
To store adjusted data
To clear adjusted data
This Mode has stored parameters.
M o ve t h e r e d f r a m e d
pointer to an item and
press the SELECT button.
