6
Computer Input
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message "D. zoom +" is displayed.
Press the SELECT button to expand the image size. And
press the Point
ed 7 8
buttons to pan the image. The
Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
e
button on the remote control.
Digital zoom +
When Digital zoom – is selected, the On-Screen Menu
disappears and the message "D. zoom –" is displayed.
Press the SELECT button to compress image size.
A projected image can be also compressed by pressing
the D.ZOOM
d
button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
ed
buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment or select an input source
from the Input Source Selection (p.26) again, or adjust the
screen size with the D.ZOOM
ed
buttons.
Digital zoom –
For zooming in and out the images
Remote Control
D .ZOOM + button
POINT buttons
SELECT button
D .ZOOM - button
✔
Notes:
• The panning function may not operate properly if the
stored Mode in the PC Adjust Menu is used. (p.30)
• The minimum compression ratio can be limited
depending on the input signal or when the Keystone
function is working or when the Custom is selected for
the screen size.
• True, Full, and Digital zoom +/– cannot be selected
when 480i, 575i, 480p, or 575p is selected in the PC
System Menu (p.27).
• Digital zoom +/- cannot be selected when Full or True
is selected.
