background image

10

Top Control

q

w

e

r

t

y

u

i

i

  INFO . button

 

Display the input source information (p.43).

t

  INPUT button

 

Select an input source (p.24).

e

  LAMP REPLACE indicator

 

Lights yellow light when the projection lamp reaches its 
end of life (pp.49, 53).

w

  WARNING indicator

 

– 

Lights red light when the projector detects an abnormal 
condition.

 

– Blinks red when the internal temperature of the 

projector exceeds the operating range (pp.44, 53).

u

  OK button

 

Execute the item selected or use it to access the 
submenu items (p.20).

y

  POINT 

ed7 8

 buttons

 

Select an item or adjust the setting values in the On-
Screen Menu.

r

  MENU button

 

Open or close the On-Screen Menu (p.20).

q

  POWER indicator

 

– 

Lights red while the projector is in stand-by mode. 

 

– Lights green during operations. 

 

– Blinks red during the cooling-off period.

 

– Blinks green in the Power management mode (p.41).

 

– Blinks orange when the automatic slide shutter is 

closed during operations (p.53).

Part Names and Functions

o

o

  POWER ON/STAND-By button

 

Turn the projector on or off (pp.18, 19).

Summary of Contents for PLV-1080HD - High Definition 1080p LCD Home Theater Projector





























































Reviews: