24
TV Operation
Plug & Play
Plug & Play Display
Plug the AC power cord of the LCD Projection TV into an AC
outlet after the antenna connection is completed.
Turn on the LCD Projection TV by pressing the POWER ON-OFF
button on the remote control or the front control and then the
automatic channel tuning will start to detect all available
channels and set them up.
1
2
This LCD Projection TV provides Automatic Channel Set-up function
called "Plug & Play" for your first time TV viewing after installation.
When the automatic channel set-up has completed, channel
position 1 and the message "AUTO SET-UP COMPLETED
HAPPY VIEWING" will be displayed.
Should no station be detected through the search, the message
"NO STATION. PLEASE CONNECT ANTENNA PLUG." will be
displayed. Turn off the LCD Projection TV and check the
antenna connection.
3
NOTE:
The Plug & Play operation can be cancelled anytime by pressing the TV MENU button or the
ALTERNATE
(
p
)
button on the remote control. The Plug & Play operation does not work
any longer if it is cancelled after any channel is detected.
To restart the Plag & Play, execute Factory default from the Setting menu. (p55)
Auto set-up is completed successfully.
When no station is detected, please check the antenna
connection. After reconnecting the LCD Projection TV
and the outdoor antenna, turn on the LCD Projection
TV. The automatic tuning will start again.
NOTE:
Before connecting the power cord to an AC outlet, Antenna connection should be completed
properly. Otherwise, the Plug & Play operation does not work properly.
PLV-
55WR1Z(P8FLZ) 04.7.7 1:01 PM ページ24